4 Commits

Author SHA1 Message Date
jinye
e45d9b4e1e
feat(serve): add daemon file logger (#4548) (#4559)
* docs(serve): design spec for daemon file logger (#4548)

Document the architecture, daemon-id scheme, API surface, tee
semantics, boot/shutdown flow, and test plan for adding a daemon-
specific file sink to qwen serve diagnostics. Companion to issue
#4548.

* docs(serve): implementation plan for daemon file logger (#4548)

Bite-sized task list covering: pure formatter, file init, info/warn/
error + flush, raw file-only tee, latest symlink, acp-bridge sink
injection, spawn factory refactor, runQwenServe wiring, docs, and
final verification + PR creation. Companion to the design spec.

* docs(serve): fix plan inaccuracies after second review pass (#4548)

- updateSymlink: re-export from core barrel first, then import
- bridge.test.ts harness: use makeBridge/makeChannel from testUtils
  (MockStream was hallucinated)
- writeServeDebugLine: enumerate all 6 call sites, not 2
- createServeApp: correct 3-arg signature (opts, getPort, deps);
  daemonLog goes in deps, not as a 1st-arg key

* feat(serve): buildDaemonLogLine formatter (#4548)

* feat(serve): daemon logger opt-out env + no-op shape (#4548)

* feat(serve): daemon logger file init + degraded fallback (#4548)

* feat(serve): daemon logger info/warn/error + flush (#4548)

* feat(serve): daemon logger raw() file-only tee (#4548)

* feat(serve): daemon logger latest symlink (#4548)

* feat(acp-bridge): onDiagnosticLine sink for serve debug tee (#4548)

* feat(acp-bridge): createSpawnChannelFactory with onDiagnosticLine (#4548)

* feat(serve): route sendBridgeError through daemonLog (#4548)

* feat(serve): init daemonLogger in runQwenServe + flush on shutdown (#4548)

* docs(serve): document daemon log file path and opt-out (#4548)
2026-05-27 14:05:52 +08:00
jinye
a3c8986e59 docs(serve): v0.16-alpha known limits + SDK QWEN_SERVER_TOKEN env fallback (PR 27) (#4473)
* docs(serve): v0.16-alpha known limits + SDK QWEN_SERVER_TOKEN env fallback (PR 27)

First PR in the F5 release chain (PR 27 → 28 → 30a → 31) per the
2026-05-24 v0.16-alpha scope freeze in #4175 (text-only chat / coding
+ local-only deployment).

## SDK ergonomic micro-change (~50 LOC + 4 tests)

`DaemonClient` constructor falls back to `QWEN_SERVER_TOKEN` env
var when `opts.token` is absent — closes the asymmetry where the
daemon side already honors this var (--token CLI flag fallback,
already in main since PR 15) but the SDK forced clients to thread
it through every construction.

Properties:
- Browser-safe via `globalThis.process` indirection (the SDK is
  imported by @qwen-code/webui; literal process.env access would
  explode at module load on browser bundles)
- Whitespace stripped (matches daemon-side trim — handy for
  `export QWEN_SERVER_TOKEN=\"\$(cat token.txt)\"` where cat adds a
  trailing newline)
- Empty / whitespace-only treated as unset (a stale
  `export QWEN_SERVER_TOKEN=\"\"` won't accidentally send
  Authorization: Bearer with no token)
- Resolved at construction, not lazily per-request (later
  process.env mutations don't affect already-built clients)
- Explicit opts.token wins over env

Tests: 4 new in DaemonClient.test.ts `bearer auth` describe
covering env fallback / explicit-wins / empty-treated-unset /
whitespace-stripped. Plus a defensive snapshot/restore on the
existing 'omits Authorization when no token' test so an
inherited test-runner export of QWEN_SERVER_TOKEN doesn't turn
that assertion into a false positive.

This SDK fallback is the entire ergonomic replacement for PR 29's
SDK env/file fallback. PR 29's other features (auto-gen daemon
token, instance-path keying, stale cleanup) remain deferred to
v0.16.x — all are DX improvements over the boot-time security gate
already shipped in PR 15.

## v0.16-alpha docs (~120 LOC markdown)

- docs/users/qwen-serve.md: new "v0.16-alpha known limits" section
  enumerating product surface (text-only ✅, multimodal ❌),
  deployment surface (local launchers ✅, containerized ❌, multi-
  daemon ❌, BYO-token ✅), and hardening posture (boot security
  gate ✅, mutation gate ✅, MCP guardrails ✅, prompt absolute
  deadline ⏸️, rate limiting ⏸️, --max-body-size ⏸️). Adds an
  alpha banner at the top of the file.

- docs/developers/examples/daemon-client-quickstart.md:
  documents the SDK env fallback in both the Hello-daemon
  intro and the Authentication section, with the "export +
  no-token-arg" recommended path called out for local dev.

Verification: 125/125 DaemonClient.test.ts pass (121 existing +
4 new); 4/4 daemon-public-surface.test.ts pass (constructor
signature unchanged); tsc clean on packages/sdk-typescript;
eslint --max-warnings 0 clean on touched .ts files.

Part of #4175.

* fix(sdk): #4473 round 1 fold-in — 2 copilot doc threads adopted

T1 [copilot DaemonClient.ts:144 — stale line refs in readTokenFromEnv
  JSDoc]: removed `runQwenServe.ts:175` (token resolution actually
  lives at line 302-318 today, would drift again on next refactor)
  and `docs/users/qwen-serve.md:173`. Replaced with stable
  symbol/section references ("runQwenServe token-resolution path";
  "qwen-serve user guide CLI flags section").

T2 [copilot daemon-client-quickstart.md:33 — `~/.qwen/server-token`
  implies built-in path that doesn't exist]: PR 27 explicitly defers
  token auto-generation + file-store fallback (PR 29 deferred features).
  The example incorrectly suggested a standard file location.
  Replaced with two explicit user-managed alternatives:
  - `openssl rand -hex 32` one-shot
  - `cat ./my-token-file` user-managed file

Both threads were accurate suggestions caught at the right time
(zero behavior change; pure docstring/example accuracy).

Verification: 125/125 DaemonClient tests pass; tsc + eslint clean
on touched files.
2026-05-27 10:31:34 +08:00
jinye
d2fdeb8b52 perf(core): F2 cleanup PR A — R9/W11/W12/R10 (post-merge follow-ups) (#4411)
* refactor(core): F2 PR A R9 — McpClientManager options-object ctor

R9 (filed as F2 follow-up from #4336 review): 7 positional ctor args
collapse to (config, toolRegistry, options?: McpClientManagerOptions).
The trailing 5 (eventEmitter, sendSdkMcpMessage, healthConfig,
budgetConfig, pool) become named fields on `McpClientManagerOptions`.
Test factory `mkManager(overrides?)` introduced at the top of
`mcp-client-manager.test.ts` so each of the prior 80 inline
constructions becomes a single line naming only the field(s) the test
overrides; the 4 `undefined` sentinels each test threaded through to
reach the trailing `pool` arg are gone.

Net: 113 LOC removed (test) + 35 LOC added (src exposes interface +
mkManager factory + tool-registry call site update). Behavior
unchanged — same field assignments, same downgrade-enforce-without-
budget breadcrumb, same budget event wiring.

Filed bucket: F2 perf / cleanup PR A (R9 + W11 + W12 + R10/R23 T7),
see issue #4175 item 7 "F2 post-merge cleanup PRs". This is the first
of the 4 fixes in PR A; W11/W12/R10 follow as separate commits.

Test sweep: 84/84 mcp-client-manager.test.ts pass; typecheck clean.

* refactor(core): F2 PR A W11 — extract attachPooledSession + rollbackReservationOnSpawnFailure

W11 (filed as F2 follow-up from #4336 review): two private helpers
on `McpTransportPool` to eliminate inline duplication in `acquire()`:

  - `attachPooledSession(entry, id, serverName, cfg, sessionId,
    toolReg, promptReg)`: builds `SessionMcpView` + `entry.attach`
    with the standard pool release callback. Used by both the
    fast-path attach (existing entry) and the post-spawn attach
    (after `await inFlight`). NOT used by `createUnpooledConnection`
    — its release callback runs `entry.forceShutdown('manual')` +
    `indexDetach` directly (no pool refcount accounting since
    unpooled entries are per-session).

  - `rollbackReservationOnSpawnFailure(reservationResult, serverName)`:
    R24 T17 contract — only release the budget slot if THIS acquire
    actually reserved a new slot (`'reserved'`); `'already_held'`
    skips because the sibling owns it. Used by both the unpooled
    catch and the pooled spawn-in-flight catch.

Race-window invariants (W10 / W77 / W90 / W111 / W125 / R24 T17)
stay at the call sites because they describe the SURROUNDING
ordering, not the helpers themselves. Helpers are documented to
defer those decisions back to callers.

Behavior unchanged. Filed bucket: F2 perf cleanup PR A (R9 done /
W11 this commit / W12 + R10 to follow).

Test sweep: 28/28 mcp-transport-pool.test.ts pass; typecheck clean.

* refactor(core): F2 PR A W12 — SessionMcpView precompute filter Sets

W12 (filed as F2 follow-up from #4336 review): `applyTools` /
`applyPrompts` precompute `excludeSet` + `includeSet` once per pass
instead of scanning `cfg.includeTools` / `cfg.excludeTools` arrays
inside every per-tool iteration.

Pre-fix the per-tool predicate (`passesSessionFilter`) walked both
arrays for every snapshot entry → O(M × N) per `applyTools` call.
With M tools × N filter entries, typical M=5-20 / N=2-5 case
finishes in microseconds either way; the win is data-structure
correctness and code clarity, not perceived perf.

`passesSessionFilter` / `passesSessionPromptFilter` (the array-
based predicates) stay exported and unchanged for unit tests + any
caller wanting to test a single name without paying Set construction.
The bulk path uses two new private helpers `compileNameFilter` +
`compiledFilterAccepts` whose Sets live on the `applyTools` /
`applyPrompts` stack frame.

Same semantics: `excludeTools` is direct-equality match (no parens
strip — pre-F2 behavior preserved); `includeTools` strips the first
`(...)` suffix so `toolName(args)` matches `toolName`.

Filed bucket: F2 perf cleanup PR A (R9 + W11 done / W12 this commit
/ R10 to follow).

Test sweep: 13/13 session-mcp-view.test.ts pass; typecheck clean.

* perf(core): F2 PR A R10 / R23 T7 — pid-descendants ps snapshot + pgrep fallback

R10 / R23 T7 (filed as F2 follow-up from #4336 review): the Linux
/ macOS pid-descendant enumeration moves from per-pid `pgrep -P
<pid>` BFS (one subprocess fork per node visited) to a single
`ps -A -o pid=,ppid=` snapshot followed by an in-memory tree walk
over `Map<ppid, pid[]>`. Windows analog: single `Get-CimInstance
Win32_Process | ConvertTo-Csv` snapshot of all `(ProcessId,
ParentProcessId)` rows replaces per-pid
`Get-CimInstance -Filter "ParentProcessId=$p"` BFS.

Two motivations:
  1. **Fork count**: typical `npx → tool` / `uvx → tool` wrapper
     trees are 2-3 levels deep with B=1-3 children per node →
     pre-fix BFS forked ~5-10 subprocesses per pool-shutdown call.
     Post-fix: exactly 1 fork regardless of tree depth.
  2. **Snapshot consistency**: pre-fix BFS walked the table level
     by level; a child that forked between two adjacent BFS levels
     could be missed (we'd see the child but query its
     descendants AFTER the new fork). The snapshot path captures
     the table at one instant; new descendants forked after the
     snapshot are tolerated by the existing ESRCH-tolerant
     SIGTERM loop.

Caveats:
  - `ps -A -o pid=,ppid=` is POSIX standard (macOS / Linux /
    *BSD), but BusyBox `ps` <v1.28 (2018) doesn't support `-o`.
    Distroless containers may not have `ps` at all. To preserve
    behavior on those edge platforms, the legacy per-pid `pgrep`
    BFS is retained as a fallback (`listDescendantPidsUnixPgrepFallback`).
    Same retention on Windows for the per-pid filter path.
  - Snapshot path uses `maxBuffer: 8MB` to cover ~250k-process
    pathological hosts. Default 1MB would clip at ~30k processes.
  - `MAX_DESCENDANTS = 256` / `MAX_DEPTH = 8` caps preserved on
    both snapshot + fallback paths.
  - Snapshot scans the entire host process table (not just the
    target subtree). On the typical 200-500 process developer
    machine this parses in <10ms; the win over BFS is real but
    not order-of-magnitude — ~2x improvement, not 100x. PR A's
    motivation framing is "fork hygiene + consistency", not raw
    perf.

Empty-result detection: snapshot path tracks `parsedRows`. If the
ps/CIM tool runs successfully but produces 0 parseable rows
(BusyBox without `-o` echoing usage, AppLocker truncating CIM
output, etc.), we throw — the outer catch falls back to the
per-pid path. A genuine "root has no children" case parses many
rows and just returns empty from the walk. So the
"no-children-found" semantics are preserved across both paths.

Test gate update: pre-fix `integration: spawn-and-enumerate` test
skipped on `CI === '1'` because pgrep wasn't available on
minimal CI runners. Post-fix `ps -A` is universally available on
non-distroless Linux/macOS — only the Windows skip remains.
6/6 pid-descendants tests pass including the now-active
integration spawn test.

Design doc (`docs/design/f2-mcp-transport-pool.md` §6.4 + the F2
follow-up table at lines 82-85) updated to reflect the snapshot
+ fallback shape, and to mark W11 / W12 / R9 / R10 as ✅ Done in
PR A with the per-fix commit refs.

This commit completes F2 cleanup PR A. Filed bucket order:
R9 (commit 0cb1eaa27) → W11 (commit 2d546efca) → W12 (commit
a4a855ab3) → R10 (this commit). Issue #4175 item 7 "F2 post-
merge cleanup PRs": PR A done; PR B (W93 + W133-a + W134) and
PR C (W133-c SDK breaking) to follow as separate clusters.

Test sweep: 287/287 F2 + cli pass; ESLint clean; typecheck clean
(core + cli). Integration test on macOS local runs the new
snapshot path successfully.

* refactor(core): F2 PR A R2 — wenshao followup (visited set + dedup predicate)

Two Suggestions from wenshao's first PR #4411 review pass (07:15Z),
both small and worth folding before merge:

PR-A-R2 #1 (pid-descendants.ts:309 — walkDescendants visited set):
  `walkDescendants`'s BFS lacked a `visited` set. If the snapshot
  captures a PID-reuse cycle — rare but possible on busy hosts with
  rapid pid churn between `ps -A`'s start and parse, where Linux
  wraparound can show a freed pid in a different parent's children
  list creating an A→B / B→A cycle — pre-fix BFS would revisit nodes
  and fill the MAX_DESCENDANTS=256 quota with duplicate entries,
  starving legitimate descendants. Pre-PR-A the per-pid `pgrep` BFS
  had the same theoretical issue but was less exposed (each
  `pgrep -P pid` call returns only DIRECT children; snapshot captures
  the whole tree at once, making cycles instantly visible).

  Fix: 3-LOC `Set<number>` add. `root` seeded into `visited` so a
  malformed snapshot listing root as a descendant of its own child
  doesn't re-enqueue root either.

PR-A-R2 #2 (session-mcp-view.ts:117 — predicate dedup):
  After W12, the exported `passesSessionFilter` /
  `passesSessionPromptFilter` still called `passesNameFilter` (the
  pre-W12 array-based implementation), while `applyTools` /
  `applyPrompts` used `compiledFilterAccepts(compileNameFilter(...))`.
  Two parallel implementations of the same predicate — future change
  to one without the other would silently diverge:
    - the exported function's tests (passesSessionFilter unit tests)
      would still pass
    - the production filter path in applyTools/applyPrompts would
      behave differently

  Reviewer also noted `passesSessionPromptFilter` had zero callers
  in production code or tests after W12 — `applyPrompts` no longer
  references it. Kept the export rather than deleting it (matches
  the `passesSessionFilter` shape for symmetry + the F3 audit-path
  comment block earmarks both as the replay predicates), but routed
  both through `compiledFilterAccepts(compileNameFilter(...))` so
  there is a single source of truth. Set construction is per-call
  for these exports (negligible for unit-test / one-off probes);
  the bulk paths in `applyTools` / `applyPrompts` still construct
  ONE filter per pass via the original W12 code path.

`passesNameFilter` (the standalone array-based helper) deleted —
its only callers were the two exports, which now use the compiled
path. Public-API surface unchanged: the two exported functions
keep their signatures and semantics.

Test sweep: 19/19 pid-descendants + session-mcp-view tests pass;
typecheck + ESLint clean.

Continues commit chain: f05917071 (R9) → 20d2f1b90 (W11) →
6cf18f641 (W12) → 2a41c6fae (R10) → this (R2 followups).

* fix(core): F2 PR A R3 T3 — Windows CSV delimiter locale fix

`ConvertTo-Csv -NoTypeInformation` honors the system locale's list
separator on PowerShell 5.1. On German / French / Dutch / Italian /
... locales the separator is `;` not `,`, so the regex
`^"(\d+)","(\d+)"$` in `snapshotProcessTreeWin` never matched →
`parsedRows === 0` → snapshot threw → fell back to the per-pid CIM
filter path with ~0.5-1s extra PowerShell startup latency per
descendant on every pool shutdown.

Fix: 1-LOC `-Delimiter ","` on `ConvertTo-Csv`. Forces comma
regardless of locale or PowerShell version. PowerShell 7+ defaults
to comma already; 5.1 (the Windows-bundled version most users have
without explicit upgrade) honored locale. The explicit delimiter
makes both consistent.

Skipped wenshao's companion Suggestion T4 (test coverage for
walkDescendants MAX_DESCENDANTS / MAX_DEPTH caps) as F2 hardening
follow-up — the caps are simple 2-line guards exercisable by
inspection; ~50 LOC of mock infrastructure isn't commensurate
with the regression risk on currently-stable defensive code,
and (per the issue #4175 follow-up bucket) we keep dedicated
test-coverage work out of perf-cleanup PRs.

Continues commit chain: f05917071 (R9) → 20d2f1b90 (W11) →
6cf18f641 (W12) → 2a41c6fae (R10) → ced5d62b0 (R2) → this (R3 T3).

Test sweep: 6/6 pid-descendants tests pass; typecheck + ESLint clean.
2026-05-27 10:29:57 +08:00
顾盼
a7e05302e6
feat(worktree): Phase C — session persistence, hooksPath, Footer + WorktreeExitDialog, three-mode --resume restore (#4174)
* docs(worktree): update design doc — split Phase C/D, add Future section

- Phase C: session persistence + hooksPath + StatusLine + WorktreeExitDialog
- Phase D: --worktree CLI flag + symlinkDirectories
- Future: sparse checkout, .worktreeinclude, tmux, PR reference parsing
- Feature comparison table updated with Phase A/B completion status

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* docs(worktree): add Phase C implementation plan

8 tasks: WorktreeSession sidecar storage, hooksPath setup,
EnterWorktree/ExitWorktree session wiring, useWorktreeSession hook,
Footer display, --resume context injection, WorktreeExitDialog.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* docs(worktree): update Phase C plan after claude-code comparison

- WorktreeSession: add originalHeadCommit field
- hooksPath: add .husky/ detection + skip-if-already-set logic
- StatusLine payload: expand worktree field to match claude-code schema
- WorktreeExitDialog: load dirty state on mount, display counts in dialog
- UIState.activeWorktree: add originalCwd, originalBranch, originalHeadCommit

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(worktree): add WorktreeSession sidecar storage

New worktreeSessionService.ts exposes read/write/clear functions for the
sidecar JSON file at <chatsDir>/<sessionId>.worktree.json. SessionService
gains getWorktreeSessionPath() so callers don't need to know the layout.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): configure core.hooksPath after worktree creation

createUserWorktree() now sets `core.hooksPath` inside the new worktree to
the main repo's hooks directory (.husky preferred, .git/hooks fallback) so
commits inside the worktree run the same pre-commit checks as the main
repo. Mirrors claude-code's performPostCreationSetup logic — skips the
subprocess when the value already matches to avoid ~14ms spawn overhead.

Failures are non-fatal: the worktree is still usable without hooks.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): persist WorktreeSession sidecar in EnterWorktreeTool

After creating a worktree, EnterWorktreeTool now writes a sidecar JSON
file at <chatsDir>/<sessionId>.worktree.json with the full session state
(slug, paths, branches, original HEAD SHA). --resume reads this in Phase
C task 7 to restore worktree context. Best-effort: write failures don't
abort the creation.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): clear WorktreeSession sidecar in ExitWorktreeTool

After successful keep or remove, ExitWorktreeTool now clears the sidecar
JSON file iff its slug matches the worktree being exited. The slug check
prevents wiping the sidecar when the user exits a worktree that isn't
currently tracked (multiple worktrees on disk, sidecar tracks one).

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): expose active worktree via useWorktreeSession + UIState

New useWorktreeSession hook watches the sidecar JSON file (created by
EnterWorktreeTool, deleted by ExitWorktreeTool) and returns the current
WorktreeSession or null. AppContainer wires it into a new
UIState.activeWorktree field consumed by Footer (Task 6) and
WorktreeExitDialog (Task 8).

A showWorktreeExitDialog state placeholder is added too, hardcoded false
until Task 8 wires the dialog trigger.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): show active worktree in Footer + StatusLine payload

Footer renders `⎇ <branch> (<slug>)` when activeWorktree != null, but
only when the user has no custom statusline (their script likely
handles it from the stdin payload itself).

useStatusLine's StatusLineCommandInput gains a `worktree` field with
{name, path, branch, original_cwd, original_branch} — matches claude-code's
schema so statusline scripts can be shared across both CLIs.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): inject context hint on --resume when worktree is active

On --resume, if the session has a WorktreeSession sidecar, append an
INFO history item pointing the model at the worktree path so it
continues using it for file operations. Stale sidecars (worktree dir
deleted out-of-band) are cleaned up so the Footer indicator doesn't
go stale.

qwen-code can't process.chdir() the way claude-code does because
Config.targetDir is immutable; the context hint is the equivalent
behavioral cue.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): add WorktreeExitDialog with dirty-state inspection

WorktreeExitDialog renders when the user double-presses Ctrl+C inside a
worktree. On mount it runs `git status --porcelain` and
`git rev-list --count <originalHeadCommit>..HEAD` to show how many
uncommitted files and new commits the user would discard by choosing
"Remove". The dialog never auto-removes — every exit goes through
explicit user confirmation per requirements.

handleExit in AppContainer intercepts the second-press quit when
activeWorktree is set and shows the dialog instead. A new UIAction
handleWorktreeExit(choice) routes the user's choice through removal
(via GitWorktreeService.removeUserWorktree) + sidecar cleanup + /quit.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* docs(worktree): add Phase C E2E test plan

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* docs(worktree): fix E2E test plan sidecar path + jq selector

- sidecar lives at ~/.qwen/projects/<sanitized-cwd>/chats/, not ~/.qwen/tmp/<hash>/
- qwen --output-format json emits a JSON array, not NDJSON — jq needs .[]

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(worktree): add showWorktreeExitDialog to dialogsVisible

Phase C task 8 introduced showWorktreeExitDialog state and the dialog
render in DialogManager, but missed adding the flag to the dialogsVisible
OR expression. DefaultAppLayout only renders DialogManager when
dialogsVisible is true, so the dialog was never shown — second Ctrl+C
in a worktree silently absorbed instead of triggering the prompt.

Caught by Group E E2E tests.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* feat(worktree): extend --resume context restore to headless + ACP modes

Phase C task 7 originally placed the worktree-restore logic in
AppContainer.tsx (TUI only). E2E Group C exposed that headless and ACP
modes never run AppContainer, so stale sidecars accumulate and the model
loses worktree context after --resume.

Refactor to a shared `restoreWorktreeContext` helper in core, then wire
the three entry points:

- TUI (AppContainer): keep historyManager.addItem(INFO) UX, route via
  the helper.
- Headless (nonInteractiveCli): prepend the notice as a system-reminder
  block on the user prompt; emit a `worktree_restored` system message to
  the JSON adapter so SDK consumers can react.
- ACP (Session.pendingWorktreeNotice): set by acpAgent.loadSession on
  resume, consumed and cleared exactly once on the next #executePrompt.

All three modes call the same helper, so stale-sidecar cleanup is
consistent. Helper covers: missing sidecar, live worktree dir,
deleted worktree dir, regular file at worktreePath, malformed JSON.

5 new unit tests for restoreWorktreeContext (13/13 pass total).

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* test(worktree): add ACP-mode integration tests for --resume context

Covers:
- acpAgent.worktree.test.ts (3 tests): loadSession sets
  pendingWorktreeNotice only when worktree dir is live, clears
  stale sidecar otherwise, swallows restoreWorktreeContext errors.
- Session.worktree.test.ts (4 tests): #executePrompt prepends the
  system-reminder block exactly once on first prompt, clears the
  pending notice, second prompt sees no leakage, no-op when nothing
  was set.

E2E via real ACP protocol is impractical without a Zed client; these
tests cover the integration boundaries directly.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* docs(worktree): clarify hooksPath comment + pendingWorktreeNotice one-shot rationale

Two doc-only fixes from PR #4174 review:

- gitWorktreeService.ts: previous hooksPath comment overstated the
  optimization (claimed claude-code's ~14ms saving but we still do a
  read subprocess). Rewrite to be explicit: write-skip only, read
  retained, parseGitConfigValue's full optimization deliberately not
  ported because the read happens once per worktree creation.

- Session.ts: pendingWorktreeNotice doc now explains why it's one-shot
  (after the first prompt the worktree path is already in conversation
  context; re-injecting would clutter history without adding signal).

No behavior change.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(test): add getResumedSessionData to nonInteractiveCli mock Config

CI surfaced TypeError: config.getResumedSessionData is not a function
across 12 tests in nonInteractiveCli.test.ts. The Phase C ada0837e2
commit added a worktree-restore call in the headless path that probes
config.getResumedSessionData(); the mock Config never had that method.

Return undefined to short-circuit the restore block — these tests
don't exercise --resume.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(worktree): address PR #4174 reviewer findings

Bundled response to the two review rounds. Per-thread replies follow.

CORE — worktree sidecar robustness (Findings 3252368644, 3252368651, 3255171690):
- atomicWriteJSON instead of fs.writeFile (no more half-written sidecar after a crash)
- readWorktreeSession now schema-validates the parsed object and returns null
  on missing/wrong-type fields instead of propagating undefined into consumers
- restoreWorktreeContext clears the sidecar on JSON parse failure / read I/O
  error so a corrupted file doesn't block every subsequent --resume

CORE — hooksPath setup (Finding 3252368645):
- configureHooksPath distinguishes ENOENT (benign "candidate not present")
  from real stat errors (EACCES/EIO/ENOTDIR); the latter are warn-logged
  so a silently-degraded hooksPath is visible to operators

CLI — handleWorktreeExit Remove path (Findings 3252368637, 3252368640 a+b):
- Anchor GitWorktreeService at activeWorktree.originalCwd (the captured
  repo root), not config.getTargetDir() — fixes monorepo-subdirectory
  launches where the worktree lives under the repo root but getTargetDir
  points at a subpackage
- Check removeUserWorktree return value; on failure, leave the sidecar
  intact so --resume can recover (previous code cleared it regardless)
- Pass forceDeleteBranch:true to honour the dialog's "discards N commits"
  label — without it `git branch -d` refused unmerged commits and the
  branch was silently preserved

CLI — useWorktreeSession watcher (Finding 3252368648):
- Normalize fs.watch filename via toString() so the Linux-Buffer code
  path triggers reloads (previous comparison silently never matched)
- Treat null filename as "unknown, reload to be safe" (recursive watchers
  on some platforms emit events without a payload)

CLI — WorktreeExitDialog (Findings 3252368650, 3255171694):
- execGit now correctly reads numeric exit codes from .code/.status
  (NodeJS.ErrnoException.code is a string for spawn errors, number for
  subprocess exits); previous typeof === 'number' check always missed
- Dialog body shows an "⚠ Could not measure worktree state (...)" banner
  when git status / rev-list failed, so the user doesn't see a misleading
  "0 files, 0 commits" before choosing Remove

CLI — closeAnyOpenDialog (Round 2 review body):
- Wire WorktreeExitDialog into the standard dialog-dismissal path so
  Ctrl+C dismisses it the same way it dismisses every other dialog

TEST FIXES — vitest timeouts:
- Real git invocations + user-global hooks (e.g. trustup post-commit
  webhooks) can take 10–20s per setUp on CI. Bump testTimeout +
  hookTimeout to 30s for the three integ test suites that spawn git
  (Phase B/C worktree integ tests) so the suite isn't flaky.

NEW TESTS:
- worktreeSessionService.test: 3 new cases covering malformed JSON,
  missing required fields, wrong-type fields, malformed sidecar cleanup,
  partial sidecar cleanup (16 total, up from 13).
- useWorktreeSession.test.tsx: 4 new cases — null when no sidecar,
  parsed sidecar at mount, reacts to delete, reacts to creation.
- WorktreeExitDialog.test.tsx: 1 new case — loading frame renders before
  git probes resolve. (Async dialog states tested via E2E — vi.mock of
  execFile in ink-testing-library doesn't fire mock impl reliably.)
- nonInteractiveCli.test: 3 new "Phase C --resume" cases — system-reminder
  injection on live worktree, no injection when sidecar absent, stale
  sidecar cleanup when worktree dir is gone.

DECLINED FINDINGS (replied on threads):
- 3252368642 (Dialog Keep clears sidecar) — declined-design. Dialog
  Keep = "exit app, keep worktree for next --resume"; tool Keep =
  "I'm done with this worktree". Intentionally different semantics.
- 3252368643 (originalHeadCommit base branch) — false-positive. There
  is no base_branch parameter; getCurrentCommitHash() returns HEAD which
  equals the tip of the current branch (== baseBranch in createUserWorktree).
- 3252368640 part c (bypass safety guards) — declined-design. The
  dialog IS the safety affordance for this path — it shows dirty-state
  counts and asks for explicit user confirmation before removal.
- 3255171696 (DialogManager async fire-and-forget) — false-positive.
  handleSlashCommand('/quit') is inside the await chain in
  handleWorktreeExit, so the described race ("process.exit before remove
  completes") cannot occur.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(test): correct linter-mangled imports in useWorktreeSession.test

Pre-commit hook auto-fixed imports collapsed value imports
(writeWorktreeSession, clearWorktreeSession) into an `import type`
block, breaking runtime resolution. Split back into value + type imports.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(test): normalize path separators for Windows in worktree session integ

Windows CI failure: `repoRoot` from Node's `fs.mkdtemp` returns
backslash-separated paths (`C:\Users\runneradmin\…`), but
`originalCwd` in the sidecar comes from `getRepoTopLevel()` which
delegates to `git rev-parse --show-toplevel` — git on Windows
returns forward slashes (`C:/Users/runneradmin/…`).

The Windows-only assertion `expect(originalCwd).toBe(repoRoot)` was
comparing two different representations of the same canonical path
and rightly failed on `Object.is` equality. Compare via path.normalize
on both sides so the assertion holds across platforms without
changing the runtime path (originalCwd still records git's output
verbatim, which is what consumers expect since other places in the
codebase that read `getRepoTopLevel()` also work with that shape).

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(worktree): address PR #4174 round 4 findings

Finding #3256237933 (Critical, follow-up to #3252368640 part 1):
handleWorktreeExit silently /quit'd when removeUserWorktree returned
{success:false}, contradicting the user's intent after they clicked
"Remove worktree and branch (discards N commits, M files)". Now
surfaces an ERROR history item with the underlying error message
and STAYS in the session so the user can decide what to do
(retry via exit_worktree, fix the lock/permission/corruption issue,
or quit anyway). Same treatment applied to the hard-failure catch
block — previously it caught the throw and proceeded to /quit with
no log; now it emits the error and stays alive.

Finding #3256236050 (Nit): originalCwd field name implies "user's
launch cwd" but actually stores `getRepoTopLevel()` (different in
monorepo subdir launches — the gap closed by #3252368637). Renaming
the field would force on-disk migration of every existing sidecar
(every active --resume breaks until users wipe the old file).
Doc-only fix: WorktreeSession.originalCwd now carries an explicit
JSDoc explaining the semantics and warning consumers expecting
process.cwd() to NOT use this field.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(worktree): address PR #4174 round 5 findings

Finding #3256241831 (Nit, but awareness UX): the built-in `⎇`
indicator used to disappear whenever `statusLineLines.length > 0`,
on the assumption that the user's custom statusline rendered worktree
itself. That assumption is unsafe — scripts written before Phase C
don't know about `payload.worktree`, scripts can deliberately ignore
the field, and partial scripts may render some fields but not
worktree. In any of those cases the user sees no worktree UI while
having an active worktree, risking destructive operations in the
wrong cwd. New behavior: indicator shows by default regardless of
statusline. Added an opt-out setting `ui.hideBuiltinWorktreeIndicator`
(default false) for users whose custom statusline already renders
worktree and want to avoid duplication.

Finding #3256239608 (Nit): `fs.watch` in useWorktreeSession holds
an inode handle to `chatsDir` at mount time. If the directory is
deleted out-of-band (manual cleanup, antivirus quarantine, reset
scripts) and recreated, the watcher does NOT re-attach to the new
inode and the Footer indicator stops reacting to sidecar changes.
Reviewer explicitly accepted this as a documented limitation rather
than adding polling-fallback or error-event-handler complexity for
an edge case that doesn't arise in normal use. Added a JSDoc block
on the hook explaining the limitation and pointing to the future
fix shapes.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* chore(worktree): regenerate settings.schema.json for hideBuiltinWorktreeIndicator

CI Lint step caught that the JSON schema mirror in
packages/vscode-ide-companion was out of date after adding the new
ui.hideBuiltinWorktreeIndicator setting in 80f9cb495. Regenerated
via `npm run generate:settings-schema`.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

* fix(worktree): address PR #4174 round 6 findings

Critical fixes:
- #3259975247: TUI dialog Remove now reads the in-worktree session
  marker and refuses to delete a worktree owned by a different
  session — same ownership guard ExitWorktreeTool already applies.
  Stale/copied sidecars can no longer destroy another session's work.
- #3259975249: TUI --resume queues a one-shot pendingWorktreeNotice
  ref consumed by handleFinalSubmit; the user's first prompt is
  prefixed with the same <system-reminder> block headless/ACP use.
  Previously only the INFO history item showed in the transcript
  (UI-only), so resumed models could silently edit the parent
  checkout.
- #3259975245: exit_worktree action='keep' no longer clears the
  sidecar. `keep` means "preserve the worktree for later"; clearing
  the persisted binding broke --resume / Footer / WorktreeExitDialog
  for kept worktrees. Now matches the Dialog keep semantics. Test
  updated to assert preservation instead of clearing.
- ACP unstable_resumeSession parity: factored the worktree restore
  block into #restoreWorktreeOnResume() and called from both
  loadSession() and unstable_resumeSession(). ACP clients using
  resume no longer miss the worktree context.

Suggestion-level fixes:
- #3259975237: configureHooksPath now resolves the canonical hooks
  dir via `git rev-parse --git-common-dir` instead of constructing
  `<sourceRepoPath>/.git/hooks`. The construction assumed .git is a
  directory, but when Qwen runs from a linked worktree it's a file
  pointing at the real gitdir → ENOTDIR → silent no-hooks worktree.
- #3259975242: only writes core.hooksPath when the key is unset.
  A non-empty inherited or user-configured value is preserved
  instead of being silently replaced.
- #3256839787: restoreWorktreeContext adds a structural invariant
  check — worktreePath must live under <originalCwd>/.qwen/worktrees/.
  A tampered/copied sidecar pointing at an arbitrary existing dir
  is rejected and cleared so the model can't be redirected.

Tests:
- worktreeSessionService.test: 17/17 (added prefix-escape rejection
  case + restructured the existing live-worktree case to satisfy
  the new structural invariant).
- exit-worktree.session.integ.test: rewrote keep test to assert
  preservation (matches new behavior).
- nonInteractiveCli.test: updated fixture worktreeDir to live
  under <originalCwd>/.qwen/worktrees/ for the prefix invariant.
- All other suites pass without modification.

Test coverage gap acknowledgement (no comment_id reply): per-handler
unit tests for handleWorktreeExit + dialog post-load states remain
covered by the E2E Group E suite in docs/e2e-tests/worktree-phase-c.md.
The execFile mock path in ink-testing-library still doesn't deliver
async useEffect state transitions reliably, so unit testing those
states adds more harness than signal; deferring.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-05-19 13:59:35 +08:00